Toploader Thickness Guide: Which Size Fits Your Cards?

Picking the right toploader comes down to one number: card thickness, measured in "points" (pt). One point is one thousandth of an inch, so a 20pt card is 0.020" thick. A toploader rated for a thickness is built for cards up to that depth. Too tight and you risk bending corners as the card goes in. Too loose and the card slides around and can get edge wear.

Quick toploader size chart

Card type Typical thickness Toploader to use
Everyday base cards, most rookies and standard inserts Up to about 20pt Standard 20pt toploaders
Thicker modern cards, chrome and refractor-style inserts, many on-card autos About 35–55pt 55pt thick toploaders
Jersey, relic and single-patch memorabilia cards About 75–100pt 100pt memorabilia toploaders
Multi-patch, bat-knob and other extra-thick memorabilia cards About 130–180pt 180pt super thick toploaders

These ranges are general guides. Thickness varies by product line, so check the card itself when you can.

How to measure a card

  • Use a caliper. An inexpensive digital caliper reads thickness in inches. Multiply by 1,000 to get points (0.055" = 55pt).
  • Check the listing or pack. Thick cards are often listed with their pt size by sellers and breakers.
  • Test fit gently. A card should slide in with light pressure and sit flat. If you have to push, go up a size.

Sleeve first, then toploader

Always put the card in a soft penny sleeve before it goes into a toploader. The sleeve protects the surface from scratches as it slides in and makes the card easy to remove later. Standard sleeves fit regular cards. For thick cards, use thick card penny sleeves (up to 130pt) so the sleeve doesn't bunch at the edges.

Toploader or magnetic holder?

Toploaders are best for bulk storage, sorting and shipping. They're light, stack well and fit toploader binders and storage boxes. Magnetic holders are better for showing off a single card, and pair well with a vertical magnetic display case.

Storing toploaded cards

  • Store toploaders upright in a box or flat in a zippered toploader binder. Avoid stacking heavy items on top.
  • Keep cards away from direct sun, heat and humidity.
  • Group by thickness so each row or pocket fits snugly.

Shop all card protection supplies.